Mounting; Details - Bosch Rexroth IndraDrive Project Planning Manual

Rexroth IndraDrive
7.3

Mounting

Details

DOK-INDRV*-ADDCOMP****-PR02-EN-P
• Mount the DC bus capacitor unit directly besides the drive controller
with the highest DC bus continuous power.
• To compensate the different mounting depths of a DC bus capacitor
unit HLC01.1C and a IndraDrive M drive controller we have suitable
distance bolts (accessories HAS03.1-002-NNN-NN; contains 2
distance bolts). You are allowed to use the distance bolts only when
the DC bus capacitor unit is mounted directly besides the drive
controller. In this case you also have to connect the contact rails for
DC bus and control voltage connection to the DC bus capacitor unit.
• Mount the distance bolts on the bright mounting surface of the control
cabinet.
A: distance bolt
B: bright mounting surface in control cabinet
Fig. 7-2: How to use the distance bolts
DC Bus Capacitor Unit HLC01.1
7-3