WimTec LOFT HDK Assembly And Operating Instructions Manual page 14

EN
LOFT
General notes
The "General installation
terms and conditions"
provided at
www.wimtec.com apply.
14 Washbasin fitting
Congratulations on purchasing the WimTec LOFT fitting.
In order to ensure that you will be able to enjoy this high-quality
product for many years, please take note of the following cleaning
and maintenance recommendations:
Use mild cleaning agents containing soap
Do not use abrasive, scrubbing, sealing or acidic
cleaning agents or disinfectants
Clean the fitting with a soft sponge or cloth only
Do not use steam cleaners
This manual is valid for the following products:
WimTec LOFT HDM - with mixer:
Art.no. 121 070, 121 056
WimTec LOFT HDK - without mixer:
Art.no. 121 063, 121 049
WimTec LOFT HDVM - with hidden mixer:
Art.no. 123 913, 123 937
Delivery scope:
Tap housing with electronic module, 230 V power unit or 9 V battery,
magnetic valve, connnection hoses, dirt-filter attachment for corner
valve, mounting material and reflux preventers at variant with mixer.
Important installation notes:
Mounting and installation may only be performed by a qualified
service provider in accordance with DIN 1988, ÖVE/ÖNORM E8001
!
and VDE 0100 Part 701. When planning and installing sanitary
facilities, all relevant local, national and international standards and
provisions must be observed! Provide for 230 V / 12 V power unit
outside of the protected zone. Maintenance of return flow valves
according to EN 806-5.
WimTec LOFT