Table of Contents
Advertisement
Access Modular
Controller
4.14
Connecting Relay Outputs
To operate locks or alarm systems, the AMC2-4R4 has eight
form C relay outputs. The outputs will be connected to the 3-pin
pluggable screw connectors S5, S6, S10, S11, S17, S18, S22,
and S23 - refer to Connecting Diagrams, page 58.
Figure 4.19: Location of the relay output connectors
Each relay output can operate in 'wet' mode, using the
AMC2-4R4's internal 12/24 Vdc power supply for external
devices or 'dry' mode with potential free contacts for externally
powered systems.
Bosch Sicherheitssysteme GmbH
Installing | en
41
2013-08 | AMC2-4R4 |
Advertisement
Table of Contents
