Table of Contents
Advertisement
Access Modular
12
en | Introduction
Controller
Figure 3.2: The AMC2-4R4 in a four door safety lock
The AMC2-4R4 can communicate upstream to the host
computer using RS-485 multi‑dropped, RS-232 or 10/100 Mbit/s
Ethernet. It has eight analog input devices and eight relay
outputs. With its analog input devices, the AMC2-4R4 verifies,
for example, if a lock is closed or open. The relay outputs can be
used to activate lock mechanisms if access is granted, or
activate the burglar alarm system if an intrusion or system alert
is detected. If the eight inputs and eight outputs on board are
not enough to configure the system, up to three additional
extensions (AMC2-8IOE, AMC2-16IE, or AMC2-16IOE) can be
connected. The extensions offer 8 or 16 additional inputs and
outputs.
The setup procedure for an AMC2-4R4 is made very simple and
fast by the use of door templates. Once selected, all the inputs
and outputs are predefined. These settings can be changed to
choose every free contact of the controller or a connected
extension.
2013-08 | AMC2-4R4 |
Bosch Sicherheitssysteme GmbH
Advertisement
Table of Contents
