Table of Contents
Advertisement
Access Modular
Controller
4
Installing
4.1
Mounting
The AMC2-4R4 can be attached on a standard 35 mm (1.377 in.)
mounting rail using a snap-in mechanism. Attach the AMC2-4R4
into the upper edge of the mounting rail [1], then push down
the device and snap it onto the rail by pushing it towards the
back [2].
Figure 4.1: Mounting the AMC2 on a mounting rail
Bosch Sicherheitssysteme GmbH
Installing | en
19
2013-08 | AMC2-4R4 |
Advertisement
Table of Contents
