Table of Contents
Advertisement
28
en | Installing
4.6.3
Grounding for Bus Interfaces
Figure 4.7: Location of ground jumper bus interfaces
Jumper C (for the second bus) and jumper D (for the first bus)
connects the internal ground of the AMC2 to the RS-485 ground
of the bus. Only set jumper C and D (C2 or D2) if the AMC2
powers all other peripheral devices which are directly
connected to the AMC2.
2013-08 | AMC2-4R4 |
Access Modular
Bosch Sicherheitssysteme GmbH
Controller
Advertisement
Table of Contents
