Introduction; Description - Bosch AMC2-4R4 Installation Manual

Access modular controller
Hide thumbs Also See for AMC2-4R4:
Table of Contents

Advertisement

Access Modular
Controller
3

Introduction

3.1

Description

The AMC2-4R4 (also called AMC2 or controller) is equipped with
four independent interfaces for RS-485 type readers. It is able to
control four doors with a reader in each direction and up to
eight doors with a reader in one direction only.
Figure 3.1: The Access Modular Controller AMC2-4R4
All necessary information for access verification is stored in a
battery buffered on-board memory and a Compact Flash (CF)
memory card. This guarantees autonomous access decisions and
complete access registrations even if the management host
system is offline. The built in compact flash card provides
adequate storage capability for cardholders and events.
The AMC2-4R4 electronics are completely covered by a plastic
housing. The liquid crystal display provides all important status
information.
Using the AMC2-4R4 gives you the full functionality and the
offline capability of a complete access control system in each
room. This leads to an excellent reliability and a very high
redundancy without extra cost.
Bosch Sicherheitssysteme GmbH
Introduction | en
2013-08 | AMC2-4R4 |
11

Advertisement

Table of Contents
loading

Table of Contents