Se-Kure Controls SK-554 Installation Instructions

Installation Instructions for the
2-on-1 Alarm w/Remote Keyway
& Power Pass-Thru
SK-554
2-on-1 Alarm with Power Pass-Thru

Optional Items

SK-947-RK
Remote Key with Small Barrel & 18" Cable
(Included with the SK-554-RK
SK-PS-932CX-T
Mouse Sensor with Micro USB Power TC Cable
SK-595
AC/DC Power Supply (5 volt. - 1 Amp)
with International Electrical Plug Ends
SK-545
Mouse Adhesive
Se-Kure Controls,
3714 Runge Street • Franklin Park, IL 60131 • 1-(800) 322-2435 • (847) 288-1111 • Fax: (847) 288-9999
Rev. 8/27/10
SK-554-RK
2-on-1 Alarm w/Remote Keyway &
Power Pass-Thru
The 2-on-1 Alarm
is compatible with a wide variety of Se-Kure Sensors,
including those that provide power to small electronics, such as the Vantage II
stand. The 2-on-1 Alarm with Power Pass-Thru, when used with one of those
sensor/stands, will provide 5v of power to mobile phones, GPS units, MP3 players
and cameras that required that power level. We used the SK-PS-932CX-T Mouse
Sensor with Micro USB power adapter as one example of a sensor that also pass-
es power thru to the protected device. Other sensor types are available with a
variety of power adapters to fit many different devices. See your Regional Sales
Manager or call Customer Service for more information.
Battery
Installation:
1.
Remove the (4)
phillips head screws
to open the battery
compartment as
shown in the
diagram.
2.
Attach a 9-volt
Connector
Alkaline Battery
(not included) to the
connector, and insert
the battery into the
compartment.
3.
Replace the
cover plate and the
(4) phillips head
Sensor Port
screws.
Note: Tighten screw
until it stops– Do
Not Over-Tighten
®
©2010 Se-Kure Controls, ® Inc.
2-on-1 Alarm No Power (Battery Only)
Cover
Plate
Battery
Inc.
SK-554NP
9-volt
Alkaline Battery
(Not Included)
On the Web: www.se-kure.com
E-Mail: info@se-kure.com
SCI-9961