Diagnosis: Status Messages - Samson TROVIS 3730-3 Mounting And Operating Instructions

Appendix
Menu
Number of initializations
Number of zero
calibrations
Tests
Step response test (PST)
Start PST
Test status
Canceled: x monitoring
Step response test (FST)
Start FST
Test status

12.3.4 Diagnosis: status messages

Menu
Diagnosis/maintenance
Device state
Status messages
Condensed state
Start-up
Initialization error
Incorrect operating mode 10.1.1.4
Travel too small
128
Adjustment range/values [default setting]/description
10.1.9 Number of initializations performed
10.1.10 Reading indicates the number of zero calibrations per-
formed since the last initialization.
10.2
10.2.1 Test to check the valve's ability to move and assess its dy-
namic control response
(PST: partial stroke test/FST: full stroke test).
10.2.1.1 Start test
10.2.1.3 Reading as progress bar
10.2.1.4 Reading in %. Canceled when range is violated.
10.2.2
10.2.2.1 Start test
10.2.2.3 Reading as progress bar
10
10.1
10.1.1
10.1.1.1
10.1.1.2
10.1.1.3
Recommended action:
10.1.1.5
10.1.1.6
Recommended action:
10.1.1.7
Adjustment range/values [default setting]/
description
Status indicators
Status indicators
Status indicators
The incorrect operating mode is set.
Change operating mode.
Confirm to clear message.
The determined travel is below the limit.
Check positioner attachment, pin position and
supply pressure.
Confirm to clear message.
EB 8484-3 EN