Table of Contents
Advertisement
AG300
Battery-operated reset function
The AG300 has a battery-operated reset function.
The battery-operated reset function is not a safety system and does not avert danger.
DewertOkin does not guarantee that the drive will function in the event of a power outage.
If the end-product manufacturer chooses to guarantee the functionality of the end product during a
power outage, then the end-product manufacturer is responsible for arranging a mechanism to en-
sure this functionality.
Using the drive systems in medical applications
This DewertOkin product complies with the safety requirements found in IEC 60601-1.
We strongly recommend that the end product (including all its components) which you are
manufacturing for a medical application should also comply with the safety requirements found
in IEC 60601-1.
You should make sure that the mechanical movement of the motor in your end product poses no
risk of injury. Conduct a risk analysis for the end product for this purpose. You should also include
safety notices in the instructions for the end product and technical safeguards in your product to
eliminate any risk.
2.2
Selection and qualification of personnel
The AG300 should only be installed into the end product by someone who has completed training
in electronic motor assembly or has equivalent qualifications.
You should only install the AG300 control system when you are qualified to do so. Otherwise, a
properly qualified person should be found for this task.
81423(-)
CAUTION
Safety notices
9
Advertisement
Table of Contents
