Table of Contents
Advertisement
AG300
7.5
Charging the AG300
The AG300 is charged by the drive or control unit that it is connected to. It is also possible to use
an external charging station to charge the AG300 (as shown in Figure 10).
NOTICE
The AG300 should only be charged by drives or control units from DewertOkin since
they have already been verified to work together. The AG300 may also be charged
with a DewertOkin charging station.
Note the following information when charging:
• Charge the AG300 completely (for at least 24 hours) before first use. The installed
• Refer to Figure 11 for the permitted charging positions.
• Allow the AG300 to rest for about 1 hour after charging it; this will prolong its life-
Figure 11
81423(-)
batteries achieve their full capacity only after 5 to 10 discharge cycles.
span.
Permitted and prohibited positions when charging the AG300
Operating notes
25
Advertisement
Table of Contents
