Table of Contents
Advertisement
AG300
1.
General Information
1.1
About these installation instructions
These installation instructions must be followed closely in order to install the AG300 successfully
and safely. These instructions are not an operating manual for the end product.
These instructions will help you to minimize danger, repair costs and down times. They will also
help you to maximize the reliability and lifespan of the end product.
The notices in these instructions must be followed! Following the guidelines during in-
stallation and connection procedures will help to minimize:
• the risk of accident and injury, and
• damage to the AG300 or the end product.
These installation instructions have been written with due care and attention. However, we cannot
guarantee that the data, images and drawings are complete and correct nor do we accept any li-
ability for the information contained therein, unless required by law.
We reserve the right to make unannounced technical changes in the course of our continual
product improvement process!
1.2
Availability of this document
As manufacturer of the end product, you are obligated to comply with Machinery Directive
2006/42/EC. This directive stipulates that the installation instructions must be kept on file for gov-
ernmental inspection purposes.
1.3
Conventions used
Notices which do not relate to safety are indicated in these instructions with a symbol:
Triangular notice symbol
Explanations of warning notices
CAUTION indicates a hazardous situation which, if not avoided, could result in minor or
moderate injury.
NOTICE
NOTICE is used to address practices which are not related to personal injury but may
result in damage to the product or surroundings.
81423(-)
CAUTION
CAUTION
General Information
7
Advertisement
Table of Contents
