Honda HRJ196 Manual page 6

Hide thumbs Also See for HRJ196:
Table of Contents

Advertisement

42VL96000.book 6 ページ 2012年10月5日 金曜日 午前10時7分
• Never pick up or carry a lawn mower while the engine is running.
• Stop the engine and disconnect the spark plug cap:
– Before clearing a blockage or unclogging the lawn mower.
– Before checking, cleaning or working on the lawn mower.
– After striking a foreign object. Inspect the lawn mower for damage
and make repairs before restarting and operating the lawn mower.
– If lawn mower starts to vibrate abnormally, check immediately.
• Stop the engine:
– Whenever you leave the lawn mower.
– Before refueling the lawn mower.
• Reduce the throttle setting during engine shut down and turn the fuel
valve off at the conclusion of mowing.
• Any part from the machine is a potential source of danger if the
machine is used in abnormal conditions or if the maintenance is not
done correctly.
• Keep all nuts, bolts and screws tight to be sure the equipment is in
safe working condition.
• Never store the equipment with gasoline in the tank inside a building
where fumes may reach an open flame or spark.
• Allow the engine to cool before storing in any enclosure.
• To reduce the fire hazard, keep the engine, muffler, battery
compartment (if applicable) and gasoline storage area free of grass,
leaves or excessive grease.
• Replace worn or damaged parts for safety.
• If the fuel tank has to be drained, this should be done outdoors.
• Wear eye protection.
• To protect you from vibrations, wear appropriate work gloves or limit
work hours, and keep engine speed at an appropriate level.
• To protect you from noises, wear ear plugs or limit work hours. Also,
check that the exhaust muffler and the blades are properly installed.
• To avoid injury, do not touch or remove the springs from the mower.
• Do not disassemble this machine by yourself, unexpected injury may
result.
• The manufacturer will not assume any liability of the machine,
damages to the machine or personal injury resulting from
unauthorized modification of the machine.
• Consult your servicing dealer for parts replacement, or at the time of
disposal of your machine.
6

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents