Cutting Height - Honda HRJ196 Manual

42VL96000.book 22 ページ ２０１２年１０月５日 金曜日 午前１０時７分

Cutting Height

Check the cutter housing cutting height settings. The lowest setting is
approximately 16 mm and the highest setting is 75 mm. To adjust
cutting height, pull the adjustment lever toward the wheel, and move it
into another notch.
If you are not sure what cutting height to select, start with a high
setting and check the appearance of the lawn after mowing a small
area. Then readjust cutting height if necessary.
22
LOWER
RAISE
RAISE
LOWER
ADJUSTMENT LEVER