HPE FlexFabric 5710 Series Installation Manual page 13

Figure 6 Mounting bracket installation positions and grounding positions on an HPE
5710-54HT switch
(1) Mounting bracket installation position near the power supply side
(2) Primary grounding point
(4) Mounting bracket installation position near the port side
Figure 7 Mounting bracket installation positions and grounding positions on an HPE
5710-30HT switch
(1) Mounting bracket installation position near the power supply side
(2) Primary grounding point
(4) Mounting bracket installation position near the port side
Attaching the mounting brackets and chassis rails to the chassis
The mounting bracket and chassis rail installation methods are the same for the HPE 5710-54HF
and HPE 5710-30HF switches.
To attach the mounting brackets and chassis rails to the chassis:
Align the mounting brackets with the screw holes in the chassis. Use M4 screws (provided) to
1.
attach the mounting brackets to the chassis.
To install the mounting brackets at the port side, see
To install the mounting brackets at the power supply side, see
and Figure 13.
1 2
(3) Auxiliary grounding point
(3) Auxiliary grounding point
Figure
9
3 4
8, Figure 9, and Figure
Figure 11, Figure 12,
10.