Installing The Switch - HPE FlexFabric 5710 Series Installation Manual

Installing the switch

CAUTION:
Keep the tamper-proof seal on a mounting screw on the chassis cover intact, and if you want to open
the chassis, contact Hewlett Packard Enterprise for permission. Otherwise, Hewlett Packard
Enterprise shall not be liable for any consequence caused thereby.
Figure 1 Hardware installation flow
Start
Install the switch
Ground the switch
Install fan trays
Install power supplies
Connecet the power cords
Verify the installation
Power on the switch Troubleshooting
No
Operating correctly? Power off the switch
Yes
End
6