Set Up A V.35 Port; Change The Ip Address Of The Ds0 Management Channel - Black Box COMPACT T1 Quick Start Manual

Quick Start
Configuration

Set Up a V.35 Port

Use the following commands to set up a V.35 port. See the set (v35) command for
details.
Command
set {slot:port} cts
{cd|high|low|rts}
set {slot:port} data
{invert|normal}
set {slot:port} clock
{source|external}
set {slot:port} speed
{56K|64K}
set {slot:port} txclkinv
{invert|normal}
set {slot:port} rxclkinv
{invert|normal}

Change the IP Address of the DS0 Management Channel

Use the following commands to change the IP over DS0 Management Channel for the
Compact T1.
Command
set ipds0 down
set ipds0 ip address
{ip-addr}
set ipds0 up
28
Description
Set the Clear to Send operation mode.
Set the data mode.
Set the clock mode.
Set the speed.
Set the transmit clock inversion mode.
Set the receive clock inversion mode.
Description
Set the DS0 management channel down
Set the DS0 management channel IP
address.
Set the DS0 management channel up.
Compact T1 - Release 6.1