Set Up A Ds0/Channel - Black Box COMPACT T1 Quick Start Manual

Set Up a DS1/T1
Use the following commands to set up a DS1. See the set (ds1) command for more
details.
Command
set {slot:port} up
set {slot:port} id {"id-string"}
set {slot:port} lbo {1-9}
set {slot:port} linecode {ami|b8zs} Set the linecode for the DS1.
set {slot:port} framing {d4|esf
|tr8afdl|tr8anofdl|tr8b}
set {slot:port} loopdetect
{on|off}

Set Up a DS0/Channel

Use the following commands to set up a DS0. See the set (ds0) command for details.
Command
set {slot:port:channel} up
set {slot:port:channel} signal
{ls|gs|emw|emdw|emicpd|dpt}
set {slot:port:channel} type
{data|voice}
Compact T1 - Release 6.1
Description
Activate the port.
Set the identification string.
Set the line buildout value for the DS1.
Set the framing option for the DS1.
Set the detection/reaction to CSU
loopcodes.
Description
Activate the channel.
Set the signaling option for the channel.
Set the channel type.
Quick Start
Configuration
23