Initial Setup; Set Up Security - Black Box COMPACT T1 Quick Start Manual

Quick Start
Configuration

Initial Setup

Use the following commands for your initial setup, for further information see the
specific command listed in this chapter.
Command
set local off
set date {mm/dd/yyyy}
set time {hh:mm:ss}
set id {"id-name"}
set clock1 {slot:port}
internal
set clock2 {slot:port}
internal
set ethernet ip address
{ip-addr} {mask}
set ip gateway {ip-addr}

Set Up Security

Use the following commands to set up the security on the Compact T1. See the set user
command for details.
Command
set user {"username"}
level {1-3}
set user {"username"}
password
22
Description
Disables DIP switches.
Set the date used for event logging.
Set the time used for event logging.
Set a system ID name.
Set the primary clock source.
Set the secondary clock source.
Set the ethernet IP address, in the
conventional IP address format.
Set the IP gateway, in the conventional IP
address format.
Description
Specify the user name and the security level.
Set a password for the user.
Compact T1 - Release 6.1