App; Download App; Signing Up/In; Adding Device - KERUI PG-103 User Manual

Cellular + wi-fi smart security system, rfid
Table of Contents

Advertisement

APP

Download app

Scan the QR codes via a smart phone to download and install the application.
Special Tips
After installing the app, the phone will request permission to receive
notifications from 'Smart Security Control'. Forbidden to receive notifications
may result in an application running failure.

Signing Up/In

If you have not registered an account yet, please tap the Sign up on the app
and follow the instructions to create your account first.
* If you do not receive an account verification code in your email registration
process, please remember to check your spam/junk folder. Once you have an
account with us, please enter your email address and password to log in.

Adding Device

One account can operate multiple devices in this app. You can establish a
connection between your hub and your smartphone via Wi-Fi.
NOTE: The hub does not support the 5GHz Wi-Fi band. If you have a
dual-band router (5GHz and 2.4GHz) and both the 2.4GHz and 5.0GHz
networks are under the same name, you will need to separate those two bands
into different names in your router settings. Android users may need to disable
cellular (mobile) data before proceeding to this step. This setting is normally
found in your smartphone's settings under Data Usage, or Mobile Networks.
If you're unable to find the setting location, we suggest using a search engine
with the following syntax: Disable (Phone Model) cellular data.
1.Tap the Airlink[+] button on Device List page on your smartphone.
2.Enter the WiFi network password on Airlink page on your smartphone.
3.Set the hub to Wi-Fi network configuration mode:
Go to Menu>Wi-Fi>Airlink and enter, 'Airlinking...' is displayed, the panel goes
into the configuration mode and counts down the time remaining .
4.Tap the Completed above operation and Start Configure on your smartphone.
This binding process should take about 15 seconds.
5.You'll find the MAC address on Device List when the network is connected.
Pick the MAC address, now you can control your bub.
20

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents