2 Setting up the device
Creating a VWorks device file
Creating a VWorks device file
About this topic
Devices and device file defined
16
For information about...
Adding the Labware MiniHub in
the device file
Creating profiles for the MiniHub
Setting teachpoints
This topic explains how to create a device file in the VWorks software. If you
already have a VWorks device file you want to use, skip this step and proceed
to
"Adding and deleting a Labware MiniHub in the device file" on page
What is a device?
A device is an item in your lab automation system that has an entry in the
VWorks device file. A device can be a robot, an instrument, or a location in the
system that can hold a piece of labware. The following are some examples of
devices:
•
Automation system robot, such as the Direct Drive Robot
•
BenchCel robot
•
Labware MiniHub
•
PlateLoc Thermal Microplate Sealer
•
Microplate Labeler
•
Bravo Platform
•
Platepad
What is a device file?
To communicate with and to control the robot and integrated devices, the
VWorks software uses a device file that contains the following information:
•
List of devices the software will communicate with and control
•
Profile of each device (communication method, unique device configuration
information)
•
System- related configuration information of each device (for example,
approach height, barcode access, and so on)
You provide the device information in the VWorks software. The device
information is stored in a device (.dev) file that is located in a folder you
specify when saving the file, for example, C:\VWorks Workspace\Device Files.
For detailed information about device files and associations with profiles,
teachpoint files, and other VWorks components, see the
Control User
Guide.
See...
"Adding and deleting a Labware
MiniHub in the device file" on page 18
"Creating Labware MiniHub profiles" on
page 26
"Setting robot teachpoints" on page 37
VWorks Automation
G5584A Labware MiniHub User Guide
18.