Figure 13 - Dc Bus Bar Terminal Detail - Unipower Bluestrak Series Operating Manual

P O W E R I N G T E C H N O L O G Y
17.5.1 Connecting Multiple Shelves in Parallel - Up to four power shelves can be
+V - V
Document Number: BLUESTREAK-MAN Rev. 6

Figure 13 - DC Bus Bar Terminal Detail

connected together to create higher capacity power systems than can be achieved
with a single shelf. UNIPOWER offers bus bar linking kits as follows:
2 shelf kit, part number 775-1509-0020. Contains two short link bars, one
for connecting the two positive bus bars together and one for connecting
the two negative bus bars together. The two link bars are identical and
interchangeable.
+V - V
3 shelf kit, part number 775-1509-0030. Contains two long link bars, one
for connecting the three positive bus bars together and one for connecting
the three negative bus bars together. The two link bars are identical and
interchangeable.
+V
4 shelf kit, part number 775-1509-0040. Contains two short link bars and
two long link bars. One short link bar and one long link bar are required for
connecting the four positive bus bars together and similarly for connecting
the four negative bus bars together. In each case the long bar is used to
connect the bus bars from three of the shelves and the short link bar is used
to connect the fourth shelf.
INSTALLATION & OPERATING MANUAL
0.625 (15.88)
- V +V
200A Max.
OUTPUT B
+V - V
- V +V
Page 28
BLUESTREAK SERIES
0.437 (11.10)
1/4-20 threaded bolts
AC4/AC3
or
DC4/DC3
- V +V
bluestreak-man-rev6-0719.indd
J1
- V
F
G