Safety And Industry Standards; Figure 6 - Module Rear View Showing Connection Details - Unipower Bluestrak Series Operating Manual

P O W E R I N G T E C H N O L O G Y
11.0

SAFETY AND INDUSTRY STANDARDS

BLUEstreak modules and power shelves meet the following safety standards:
11.1
BLUEstreak modules and power shelves are CE Marked to indicate conformance with the
11.2
European Union's Low Voltage Directive.
Input conducted EMI meets FCC20780 part 15J Curve B and EN55022 Curve B.
11.3
11.4 Input harmonics, meets EN61000-3-2 Class D
11.5 Immunity, meets the following:
12.0 OPERATING INFORMATION
12.1 Input Voltage and Connection - The BLUEstreak Series operates from worldwide AC
input voltages in the range of 85 to 264 VAC at 47 to 63 Hz. There are restrictions to the
available total output power when operating at low line, 85-132VAC. The three-wire AC
connection is made to pins P1, P2 & P3 on the rear mounted connector. See the connector
diagram and Pin Connections table in Figure 5.
Output Connections - The main output is provided on pins P4 to P9 on the connector.
12.2
Three pins (P4 to P6) are connected together internally for the +V Out; three other pins (P7
to P9) are connected together internally for the V Return. The output is fully floating and
may be configured for positive or negative operation.
Document Number: BLUESTREAK-MAN Rev. 6
UL60950-1, 2nd Edition
CSA22.2 No. 60950-1, 2nd Edition
EN60950-1, 2nd Edition
Input fast transients, line to line – EN61000-4-4, level 3, criteria A
Input surges, line to line – EN61000-4-5, level 3, criteria A
Input surges, line to ground – EN61000-4-5, level 4, criteria A
ESD – EN61000-4-2, level 4, criteria A
Radiated – EN61000-4-3, criteria A (10V/m)
Dips, Interruptions & Variations – EN61000-4-11, criteria B/C

Figure 6 - Module Rear View showing connection details

INSTALLATION & OPERATING MANUAL
Page 15
BLUESTREAK SERIES
bluestreak-man-rev6-0719.indd