Advertisement
Becker DTM /High speed (i.e. BE-7892, BE7910)
Press the Sound button for more than 2 seconds
1.
Press multifunction button "AUX"
2.
Select Aux Mode on
3.
The setting is stored automatically
4.
In CD Operation, the multifunction button AUX must be pressed to select
AUX operation
Test Operation
Turn ignition to "ON" or "ACC"
1.
Turn radio "ON"
2.
Connect audio device (iPod, iPhone, iPad) to USB Terminal with
3.
authentic Apple charging cable (See warning below)
Audio device will begin charging
4.
Press button on radio to enter AUX mode. If radio does not enter AUX
5.
mode please follow steps in "Enabling AUX function" above.
Initiate music playback on audio device.
6.
Warning!
Playlist and Track selection is *NOT* possible from the radio.
You must use the iPod built-in controls to access music files
Use radio volume control to set playback level
7.
If successful go ahead and Reinstall radio
8.
Alert!
Authentic Apple charging cable required for proper operation.
Knock –off Lightning cable may intermittently. If suddenly music plays
from Apple device built-in controls, it is very likely due to charging
cable not being an authentic apple charging cable.
Frequent asked questions
1.
Does the USB-BKR play older Apple and Android devices?
NO, this adapter charges all devices but playback is only possible from
Apple Lightning devices (older 30-pin devices will charge but not play).
2. Music stops playing on car speakers and plays through phone. Why is
that?
this is very likely due to faulty or no-authentic Apple charging cable. Please
use Apple authentic cable for this adapter to perform as intended.
3. Does the USB-BKR work on all Becker radios?
NO;
the USB-BKR only works on Becker radios with "AUX" input
capabilities. Becker radios with no AUX menu option (e.g. CR-210, CDR-210,
CR-1 etc.), are NOT compatible.
4. Do you offer an adapter that works on Becker radios without "AUX"
input capabilities?
YES;
Our
iL-BKRCD
Changer remains connected but will no longer function. You may also
purchase our
5. Can I control my Apple device from the radio buttons?
NO;
you must use Apple built-in controls and display to operate the
device. Volume button on radio is used to set playback level.
Disclaimer
.
• This product has no affiliation with Porsche, Becker or Apple
• We're not liable for misuse of this product.
•We recommend professional installation.
Email
support@discountcarstereo.com
© 1995-Jan-20 Discount Car Stereo, Inc. All rights reserved. Information in this document is
subject to change without notice. Other products and companies referred to herein are
trademarks or registered trademarks of their respective companies or mark holders.
works but only if vehicle has a CD Changer. The CD
IS-7705
FM Modulated adapter which work on any FM Radio.
Advertisement
