Related Manuals for Becker USB-BKR
Summary of Contents for Becker USB-BKR
- Page 1 Courtesy of: DiscountCarStereo.com Serving the internet community since 1995 USB-BKR Quick Start Installation Guide for Becker AUX Ready Radios Works on Becker radios with AUX menu option only! Revised: January 30, 2020...
-
Page 2: Installation
Apple Lightning devices without sacrificing the look and feel of the dashboard components. (Non-Lightning devices will charge but not play audio). The USB-BKR works on all Becker AUX ready radios (Aux setting within radio menu) and requires sacrificing the CD changer present). - Page 3 Special installation for Ferrari Cascade radios (BE6111, BE6112 etc) with factory Hands- Free option: In order to retain cluster display (see Fig. 4a) and/or factory hands-free Fig. 4b calling option, you must purchase our ISO8-HAR harness which allows the USB-BKR to work in these applications. (See Fig. 4b).
- Page 4 5. Disconnect radio’s A chamber (See Fig. 3) 8-pin plug and connect to A. Flush with Dash or Panel (requires drilling) power supply harness 8-pin connector (See Fig. 5) Drill a ¾” hole in the dash or panel using a step drill bit or equivalent 6.
- Page 5 Slide USB head (See Fig. 9) through hole created in step 1 until it snaps With Support Bracket (No drilling) in place and flush with mounting surface (See Fig. 10) Locate a flat surface at location of choice within 6 ft. of radio to mount the USB support bracket using adhesive/tape or screws.
-
Page 6: Operation
Turn the Tuning Knob until AUX OFF is displayed. Turn radio "ON" Press either button located directly under the Arrows on the display to 2. Press and hold the "TP" button for about 8 seconds until Becker 1 is change the present setting from OFF to ON displayed. - Page 7 Press the rotary control/push (OK) button Turn the rotary control /push (OK) button to select External Device Becker 4775 (Land Rover Traffic Pro) Confirm selection by pressing the rotary control/push (OK) button Select “AUX” from list and turn it “ON”.
-
Page 8: Frequent Asked Questions
Becker radios with no AUX menu option (e.g. CR-210, CDR-210, Test Operation CR-1 etc.), are NOT compatible. 4. Do you offer an adapter that works on Becker radios without “AUX” input capabilities? Turn ignition to “ON” or “ACC” Turn radio “ON”...