Table of Contents
Advertisement
Checking the Contents of the Shipping Carton
Mounting the FrameSaver SLV 9580 DSU
2
The shipping carton for your FrameSaver SLV 9580 DSU should contain:
H
FrameSaver SLV 9580 DSU
H
Two DS3 network cables
H
One power cable for each power supply installed
H
Two mounting brackets
H
Installation kit containing machine screws and other hardware
H
Installation instructions
H
User's guide
Notify your supplier if anything is missing or damaged.
The FrameSaver SLV 9580 DSU can be mounted in a standard 19-inch or
23-inch cabinet or open rails, and either flush with the mounting rails or
approximately 4 inches forward of the rails. The different configurations are
accommodated by positioning two mounting brackets.
The following procedure requires:
H
A fiber-tip marking pen
H
A large Phillips screwdriver
H
Mounting brackets and #8 flathead machine screws
H
Four self-retaining nuts (for rails with unthreaded holes)
H
Four #10 machine screws (for use with self-retaining nuts or rails with small
threaded holes)
H
Four #12 machine screws (for rails with large threaded holes)
The mounting brackets, machine screws, and self-retaining nuts are supplied
with the FrameSaver SLV 9580 DSU.
June 1999
9580-A2-GZ40-10
Advertisement
Table of Contents
