Mitsubishi GOT MELSEC 800 Series User Manual page 41

4.
MONITOR SPECIFICATION MELSEC GOT
-
When the
GOT
Internal devlce read command 1 s executed
PC CPU A852GOT
GOT internal device
Raed command
@ Write the data (such as operation command data) from GOT
to the GOT intemal device.
@ Using the sequence program, store the read command data
to the remote register (RWw).
@
When the GOT request flag is turned on, the read com-
mand data is stored in the A852GOT remote register (RWw),
and the data in the specified GOT intemal device is read to
the remote device (RWr).
@ By link scan, the data is stored in the remote device (RWr)
of the A852GOT allocated to the master station.
@
Using the sequence program, read the remote device (RWr)
data to the PC CPU.
Repeat the above steps and execute the read commands,
then read several information to the PC CPU.