Installation And Setup; Control Panel; Main Functions - Vari Lite VL800 EVENTWASH User Manual

INSTALLATION AND SETUP

1. MOUNTING
The unit should be mounted via its screw holes on the bracket. Always
ensure that the unit is fi rmly fi xed to avoid vibration and slipping while
operating. Always ensure that the structure to which you are attaching
the unit is secure and is able to support a weight of 10 times of the unit's
weight. Also always use a safety cable that can hold 12 times of the
weight of the unit when installing the fi xture.
The equipment must be installed by professionals. It must be installed at
a place where is out of reach of people and has no one pass by or under
it.
2. SET UP

CONTROL PANEL

1 2

MAIN FUNCTIONS

To select any functions, press the MENU button until the required one is shown on the display. Select the func-
tion by the ENTER button and the display will blink. Use the DOWN and UP button to change the mode. Once
the required mode has been selected, press the ENTER button to setup or it will automatically return to the
main functions without any change after idling one minute. Back to the functions without any change press the
MENU button. The main functions are shown in
912400575012UM
3 4 5 6
TABLE
3
1 LCD display - shows the menu and selected functions
2 Buttons:
MENU - To select the programming functions
DOWN - To go backward in the selected functions
UP - To go forward in the selected functions
ENTER - To confirm the selected functions
3 DMX IN - 5-pin XLR cable to link DMX console
4 DMX OUT - 5-pin XLR cable to link to the next unit
5 Power In - connacts to power supply
6 Power Out - connects to next fixture
1.
W W W.VA R I - L I T E . C O M
USER MANUAL