SpringWell ULTRA UWS1 Installation Instructions Manual page 9

Ultra Whole House Well Water Filter System Combo
Note: If your tank was shipped
with a jacket, it can be zipped
around the tank prior to or after
the installation is completed.
22) Unscrew the cap on top of
the well water filter tank.
25) Align the opening on the
bottom of the tank head with
the pipe inside the tank.
Installing the Well Water Filter
Electronic Head
This step will require the materials listed below
Tank
1
Softener
Tank
23) There is a blue cap inside
that also needs to be removed.
Both caps can be discarded.
26) Press the tank head down to
allow the threads to catch.
Questions? Call (800)-589-5592
Head will be
"Well Water
Electronic
Head
24) Locate the opening at the
bottom of the well water filter
electronic head.
27) Turn the tank head
clockwise until it is fully
tightened.
labeled
Filter"
9