SpringWell ULTRA UWS1 Installation Instructions Manual page 18

Ultra Whole House Well Water Filter System Combo
Powering the Tank Head
This step will require the materials listed below
Well Water Filter Tank
(Already Installed)
77) The power adapter will then
be plugged into a power supply
that isn't controlled by a switch.
80) Replace the tank head
cover.
Power 9v Battery
Supply
78) Lift off the cover on the
electronic head.
Questions? Call (800)-589-5592
76) The power cord will be
connected to the connection
on the far left beneath the
electronic tank head.
79) Locate the batter
connection beneath the
display. Connect a 9v battery
then store it in the tray.
You are ready to test the system
18