Table of Contents
Advertisement
PLAYBACK MENU
Press the VCR MODE softkey and then use the arrow keys to
select one of the three modes listed below:
VCR
OFF
MODE
MAN
VCR
MODE
VCR
AUTO
MODE
The power on default for VCR MODE is OFF.
INTERLACE
The video signal has to be interlaced in order to produce a good
recording on a VCR. An interlaced video signal will cause a small
amount of vertical jitter on the video monitor. Interlace is turned
off to aid viewing pictures on the monitor and turned on to pro-
duce the best possible recording on a VCR.
A video signal is interlaced when the odd and even fields are offset
by half of one horizontal line. All of the television pictures you view
at home are interlaced and most computer displays are not.
The output video is not
interlaced and the remote
VCR controller is off.
The output video is interlaced
and the remote VCR controller is
off. The operator must manually
operate the Processor and the
VCR in order to make an archive
recording on the VCR.
The output video is interlaced.
The Processor automatically
makes a recording, downloads
the pictures to a VCR and then
keeps repeating the sequence
until the operator presses a
STOP key.
PLAY
5.29
Advertisement
Table of Contents
