Table of Contents
Advertisement
PLAYBACK MENU
GAMMA
0.9
The GAMMA correction is normally set to a value of 0.9 but has a
range from 0.1 to 1.0.
GAMMA correction is used to electrically correct a video monitor's
gray scale rendition. GAMMA correction has the effect of increas-
ing the contrast in the darker areas of the picture. This is useful
when the lighting has been less than optimum and you wish to
get a better look at subject matter that is lost in the darker areas
of the picture.
To bring up the detail in the darker areas of the picture change
the GAMMA correction factor from 0.9, to 0.8, to 0.7, and so on,
until you can see what you need to see.
When the Processor is powered on the GAMMA correction will
return to the same value that was in effect when power was
turned off.
Press the GAMMA softkey and
then use the arrow keys to
change the gamma correction
factor.
PLAY
5.27
Advertisement
Table of Contents
