KODAK EKTAPRO
Imager
Not
KODAK EKTAPRO 1000 Imager
EASTMAN KODAK COMPANY, Motion Analysis Systems Division
San Diego, CA 92121 Made in U.S.A.
Used
To be used only with the
KODAK EKTAPRO 1000 Processor
REMOTE REC/STOP
The remote record/stop connector allows you to start or stop a
recording remotely. Please see {IMAGER REMOTE RECORD/STOP
in Chapter 8 starting on page 8.2} for details on using the
Remote Rec/Stop connector.
VIDEO OUTPUT CONNECTOR
RCA type connector that provides the same video signal that
appears on the rear panel of the Processor. This video output
provides a way to connect a remote monitor to an Imager that is
a long distance from the Processor.
2.2
Remote Rec / Stop
Serial No.
Tripod
Imager Cable
Mounting
Video Output
Connector
MONITOR
Gain
Switch
Not Used
HEADSET
Not Used