IBM N3400 Installation And Setup Instructions page 6

About the IBM N series support website
The IBM System Storage N series support website requires users to register in order to obtain access to N
series support content on the web. To understand how the N series support web content is organized and
navigated, and to access the N series support website, go to the following publicly accessible web page:
www.ibm.com/storage/support/nseries/
This web page also provides links to AutoSupport information as well as other important N series
product resources.
Items supplied by you for the installation
You need to supply the following items to complete the installation:
v Ethernet LAN cables
v Fibre Channel (FC) cables
v Console (for example, a PC or laptop)
v #2 Phillips screwdriver and slotted screwdriver
v Pointed tool for setting termination and ID switches
Important: The following instructions are for a basic configuration with onboard ports set to initiator
mode.
Installing in a non-IBM rack
The rack installation instructions provided in this document apply specifically to the installation of the N
series product in an IBM 19-inch rack. IBM service personnel cannot install the N series product in a
non-IBM rack.
If the N series product is being installed in a non-IBM rack, the rails shipped with the N series product
may or may not work with the non-IBM rack. Physical installation of the N series product in a non-IBM
rack is the customer's responsibility.
vi