Cleaning Functional Filters - Carrier Klarwind User/Install Manual

Cleaning functional filters

● Before cleaning the functional filter, make sure to power off.
● If it is not possible to remove dust, replace it with a new one.
● Clean the functional filter with a vacuum cleaner once every three months, depending
on the level of pollution and the amount of time the unit is in use.
Note
Separate the cover from the bottom of
1
the unit. Open both ends of the cover
and pull it forward.
Separate the functional filter from the filter frame.
3
Use a vacuum cleaner to clean the functional filter.
4
After cleaning, re-insert the functional filter into the filter frame.
5
Then, insert the filter frame into the unit.
Note
28
Carrier Standing Type Inverter Air Conditioner
Filter purchase inquiry (Contact your local dealer.)
The specification of functional filter varies depending on the product model.
Separate the filter frame from the
2
bottom of the unit. Lift the filter frame
to unlock it and pull it forward.
Functional filter
filter frame
fixing snap fits
filter frame
fixing snap fit