Replace Fine Particle Filter; Check Float; Spare Parts; Standard Delivery - Renfert Vortex compact 3L Instruction Manual

• Replace the top of the extractor and close the reta-
ining clamps (Fig. 6). Ensure the retaining clamps
are in the correct position (Fig. 11).
4.4 Replace fine particle filter
Never extract dust without putting in a fine-
particle filter!
• Turn off and unplug unit from the mains.
• Open holding clamps and remove top from
extractor (Fig. 4).
• Turn tightening disk anticlockwise and remove
(Fig. 15).
• Carefully remove fine particle filter (Fig. 16).
• Clean filter seal, check for damages and replace as
necessary.
• Put in new fine particle filter.
• Put on filter tightening disk and turn clockwise to
firmly lock in place (Fig. 17).
• Dispose of used fine particle filter according to local
statutory regulations.
• Place top back on extractor and snap on holding
clamps (Fig. 6). Make sure clamps fit tightly.
4.5 Check float
• Switch the unit off and remove the plug from the
socket.
• Open clamps and remove the top part of the extrac-
tor (Fig. 4)
• Turn the spring washer in a clockwise direction and
remove (Fig.15).
• Check the float is clean and able to move freely
(Fig.18).

5. Spare Parts

For the order numbers of consumables and spare
parts please refer to the spare parts list at the end of
this manual.
EN

6. Standard Delivery

1 Renfert Vortex compact 3L
1 Suction hose assembly, 3m
1 Bag-type filter
1 Operating Instructions

7. Variants

No. 2924-5000 Vortex compact 3L, 230 V, 50/60 Hz
No. 2924-6000 Vortex compact 3L, 120 V, 60 Hz

8. Accessories

No. 2924-5003 Set of dust bags (5 pcs)
No. 2924-5005 Cloth filter
No. 2924-5002 Disposal bag (5 pcs)
No. 2924-5004 Fine particle filter 302000461
No. 2924-5006 90° angled connector
No. 900034305 Adapter for hose connector
No. 900034240 Suction hose assembly, 3m
No. 900034314 Y-shaped adapter
No. 2925-0000 Extractor clamp (w/o glass pane)
No. 2925-1000 Glass pane w/ holder
(for mouthpiece)
No. 2926-0000 Extraction distributor, including 4
sleeves (w/o hose)
No. 2921-0003 Set of sleeves, 2 pcs
No. 15-0823 Suction hose (by metre)
- 16 -