Maintenance/Others - Canon EOS C500 Mark II Instruction Manual

Maintenance/Others

Cleaning
Camera body
• Use a soft, dry cloth to clean the camera's body. Never use chemically treated cloths or volatile solvents such
as paint thinner.
Lens
• Remove any dust or dirt particles using a non-aerosol type blower.
• Use a clean, soft lens-cleaning cloth to gently wipe the lens. Never use tissue paper.
LCD screen
• Clean the LCD screen using a clean, soft lens-cleaning cloth and commercially available cleaning fluid for
eyeglasses.
• Condensation may form on the surface of the screen when the temperature changes suddenly. Wipe it with a
soft dry cloth.
Condensation
Moving the camera rapidly between hot and cold temperatures may cause condensation (water droplets) to form
on its internal surfaces. Stop using the camera if condensation is detected. Continued use may damage the
camera. Condensation may form in the following cases:
• When the camera is moved quickly from cold to warm places
• When the camera is left in a humid room
• When a cold room is heated rapidly
When condensation is detected
The precise time required for water droplets to evaporate will vary depending on the location and weather
conditions. As a general rule, wait for 2 hours before resuming use of the camera.
To avoid condensation
Remove the battery pack and any cards. Then, place the camera in an airtight plastic bag and let it adjust
gradually to temperature changes before removing it from the bag.
Using the Camera Abroad
Power Sources
You can use the battery charger and compact power adapter to charge battery packs in any country/region with
power supply between 100 and 240 V AC, 50/60 Hz. Consult a Canon Service Center for information on plug
adapters for overseas use.
Maintenance/Others
215