Canon EOS C500 Mark II Instruction Manual page 58

Recording Video and Photos
Peripheral Border Display
You can apply the peripheral border display to all display levels in CAMERA mode. With the peripheral border
display, the camera's image is reduced slightly so the onscreen displays are shown mostly around it and not on
top of it, partially hiding it.
58
Select > [¢ Monitoring Setup] > [Apply Peripheral Border] > Desired option.
Options
[DISP Level 1/2/3]:
Peripheral border display is always used.
[DISP Level 1/2]:
Peripheral border display is used for display levels 1 and 2.
[DISP Level 1], [Disp Level 2], [Disp Level 3]:
Peripheral border display is used for the respective display level.
[Off]: Full-screen display is always used.
Display Levels in MEDIA Mode
In MEDIA mode, the information displayed at each display level cannot be customized and the onscreen displays
during playback (A 134) will change as follows.
Recordings
Clips
Photos
NOTES NOTES
• Some onscreen displays, such as video scopes, onscreen markers and AF frames will be displayed
permanently even at display level 2. Turn them off with their respective function or select display level 3.
• When the zebra pattern or false color display is activated, it will appear on the screen regardless of the
selected display level.
Full-screen display
Display level 1
Joystick guide and playback
information about the clip
Photo information
Peripheral border display
Display level 2
Only playback information
about the clip
No onscreen displays
Display level 3
No onscreen displays
—