Canon EOS C500 Mark II Instruction Manual page 120

Assignable Buttons
NOTES
• You can check the [
assigned to each button.
120
• You can reset only the functions assigned to the assignable buttons, without affecting other camera settings,
with the
return to their default function.
Assignable functions
Functions can be set separately in CAMERA mode and MEDIA mode. Refer to the following table for assignable
functions and available modes.
Function name
[(NONE)]
[One-Shot AF]
1
[AF Lock]
[Face AF]
[Face Detection]
[Tracking]
[Focus Guide]
[Peaking: All]
[Peaking: VIDEO Term.],
[Peaking: EVF-V50],
[Peaking: MON./HDMI]
[Magnification]
[Magn.: VIDEO Term.],
[Magn.: EVF-V50],
[Magn.: MON./HDMI]
[Push Auto Iris]
[Iris Mode]
[Iris +], [Iris –]
[ND +], [ND –]
[AE Shift +], [AE Shift –]
[Backlight], [Spotlight]
[Zebra: All]
[Zebra: VIDEO Term.],
[Zebra: EVF-V50],
[Zebra: MON./HDMI]
[WFM: All]
[WFM: VIDEO Term.],
[WFM: EVF-V50],
[WFM: MON./HDMI]
Assignable Buttons] status screens (A 194) to see what functions are currently
> [B System Setup] > [Reset] > [Assignable Buttons] function. All the assignable buttons will
No function assigned – the button is disabled.
The camera focuses automatically one time only (one-shot AF function).
Locks the focus during continuous AF.
Toggles the [Face AF] setting between [Face Priority] and [Face Only].
Turns the face detection function on/off.
Turns the tracking function on/off.
Turns the focus guide on/off.
Turns peaking on/off on all monitoring devices.
Turns peaking on/off only on the LCD monitor, an optional viewfinder or external
monitors, respectively.
Turns magnification on/off.
Selects the output terminal for the magnified display and turns magnification
on/off only on the LCD monitor, an optional viewfinder or external monitors,
respectively.
The camera automatically adjusts the aperture only while the button is held
pressed down.
Switches the aperture adjustment mode between automatic and manual.
Opens up/closes the aperture, respectively.
Cycles through ND filter settings in increasing (higher density) or decreasing
(lower density) order, respectively.
Compensates the exposure making the image brighter/darker, respectively.
Toggles the light metering mode between [Standard] and [Backlight]/[Spotlight],
respectively.
Turns zebra patterns on/off on all monitoring devices.
Turns zebra patterns on/off only on the LCD monitor, an optional viewfinder or
external monitors, respectively.
Turns the selected video scope on/off on all monitoring devices.
Turns the selected video scope on/off only on the LCD monitor, an optional
viewfinder or external monitors, respectively.
Description
CAMERA MEDIA
A
mode mode
Ü Ü
–
Ü
– 83
Ü
– 85
Ü
– 86
Ü
– 86
Ü
– 87
Ü
– 81
Ü
– 82
Ü
– 82
Ü
– 74
Ü
–
72
Ü
–
Ü
– 71
Ü
– 75
Ü
– 75
Ü
– 92
Ü Ü
108