Fitting The Heat Exchanger Module To The Combustion Chamber Module - Viessmann Vitocrossal CRU Series Installation Instructions Manual

Fitting the heat exchanger module to the combustion chamber module

!
Please note
Scratches inside the combustion chamber or on
components that come into contact with flue gas
can lead to corrosion damage.
Never place tools or other objects inside the
combustion chamber.
10x
110 Nm
3.
A
Fig. 7
Combustion chamber module
A
Heat exchanger module
B
12
2.
C
A
B
C
1. Lift the heat exchanger module by the lifting eyes.
C
D
B
C
D
Gaskets (included)
C
Nuts M16 and dished washers (included)
D
D
D
4.
4x
60 Nm