Assembly Of The Thermostatic Setting Head - emmeti 01350340 Manual

3 Assembly of the thermostatic
setting head
Warning
The head must never be installed vertically: this would compro-
mise its temperature sensitivity.
1 Turn the thermostatic setting head knob to the highest tem-
perature position: position 5.
2 Couple the setting head with the valve, pressing it until it
hits the valve body, so that the temperature reference point-
er  is orient towards the top.
Warning
Hexagon  of the valve must be inserted into the seat  on
the base of thermostatic head (see Fig. B).
Fig. B
24
