ASSEMBLY AND INSTALLATION
T0414 / T0415
WARNING:
NOTES: 1. Before installing, consult local electrical codes for wiring and grounding requirements.
2.
READ AND SAVE THESE INSTRUCTIONS.
Hardware Package (included):
Mounting Screw X2
Mounting Screw X2
#6/32 X1/2 in
#8/32X1/2 in
Important to Know:
1. If you are not familiar with state and local electrical
codes, it is recommended that you consult with a
qualified electrician.
2. This fixture requires a 120 VAC, 60 Hz power
source.
3. For general safety and to avoid any possible
damage to the photocell, be sure the power is
switched "off" before adjustment.
Maximum Wattage: 44 W
Working Temperature Range: -
Note: Fixture can be wall mounted or eave mounted.
Wall Mounted
INSTRUCTIONS
TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF
POWER WHILE INSTALLING OR SERVICING THIS FIXTURE.
Mounting Screw X2
#10/24 X1/4 in
4°F ~ 113°F
Page 1 / 3
Mounting Strap
Decorative cover
Features:
1. Energy saving LED fixture.
2. Photocell keeps the light OFF during daylight hours.
3. When in manual override mode, it can be switched
from 100% high level to low level brightness.
Eave Mounted
Wire Connector X3
Fixture Mounting Screw
180408