Bose DesignMax DM2S Installation Manual page 7

PRO.BOSE.COM
Adjusting the Logo
You can rotate the Bose logo to align with your loudspeaker orientation. With
both hands, press the button on the back of the grille and rotate the logo
with your thumbs. The logo can be rotated clockwise or counterclockwise. To
remove the logo, pinch the button inward with one hand and pull the logo with
the other.
Attaching the Grille
Insert the safety lanyard pin into one of the two lanyard pin holes in the loudspeaker. Using both hands, position the grille against the
loudspeaker, ensuring the grille is flush against the loudspeaker with no gaps. The grille secures to the loudspeaker magnetically.
Safety and Regulatory Compliance
The Bose DesignMax DM2S loudspeaker has passed testing and complies with the following specifications and uses:
Listed to ANSI/UL 1480A-2016, Speakers for Commercial & Safety Professional Use
General-Purpose Use - UL Category UEAY, File Number S 5591 Control Number 3N89
Suitable for installation using Class 1, Class 2, Class 3 wiring methods in accordance with NFPA 70, National Electrical Code,
2017, Article 640
The DesignMax DM2S loudspeaker has been designed to the requirements defined in the following European regulatory specification for
combination systems:
Tested to IEC60268-5, 2007
Installation Guide • DesignMax DM2S
Installation
English • 7