Radio Transmitter - Bellman & Symfon Visit 868 BE1410 Manual

Technical Solutions

Bellman Visit System Information

Troubleshooting

You can carry out a number of checks yourself before sending a product for repair.

Troubleshooting guide

Problem

Nothing happens.

The Portable Receiver does not pick up signals from the

Bellman Visit 868 transmitters, but works when the test

button is used.

The receiver signals when no transmitter is activated.

The receiver does not emit any sound signals.

The receiver emits a sound but no light signal.

The green LED (2) lights up yellow when the Receiver

is activated.

No sound is reaching the linked audio system.

Bellman Visit 868 Audio

Solution

• Change the batteries. Only use LR14 alkaline type batteries.

• Check that the Bellman Visit 868 Portable Receiver is set to

the same radio key as the other units in the relevant Bellman

Visit 868 system. For further information see Appendix/

Further information/Settings/Radio key.

• Check that the receiver is not placed too far away by moving

it closer to the transmitter.

• Change the Radio Key on all units in the relevant Bellman

Visit 868 System. There is probably another system nearby with

the same Radio Key.

• Turn up the volume using the volume control (1).

• Check that on/off light signal switch (11) is set to the ON

position.

• Change the batteries. Only use LR14 alkaline type batteries.

• Check the connection to the audio output (8).

• Check the connection by referring to the user manual for the

linked audio system.