Be1341 Bellman Alarm Clock - Bellman & Symfon Visit 868 BE1410 Manual

Page 152
Testing
It is easy to test the Bellman Alarm Clock, BE1341. If the Alarm Clock does not work as described below, you
can check further under Troubleshooting guide.
How to test
The BE1341 Bellman Alarm Clock should always be connected to the electric socket with the enclosed power
supply unit.
To test the flashing light, sound and vibration with the BE1270 Bellman Bed-shaker (accessory):
• Switch on the alarm with the Alarm Dial (5) by turning it to position 1
• Turn the Alarm Pointer anticlockwise using the Alarm Call Knob (10) until the alarm on the clock is
activated.
• The Bellman Alarm Clock will give the following indications:
o Switching on clock face background illumination (3).
o Flashing with the flashing lights (17) on the front, provided that the Flash Switch (9) is in the ON
position.
o Emitting a sound signal, provided that the sound switch (7) is in the ON position.
o A BE1270 Bellman Bed-shaker (accessory) will vibrate if connected
Two tests are required to carry out a full test of the external trigger; one to test contact and another to test
voltage. For further information see Activation. Please note that when the Snooze Button (4) is pressed during
an alarm from an external trigger, any further alarm via the external trigger will be ignored for 45 seconds.
• Connect the alarm unit to the external trigger input (13).
• Activate the alarm.
• The Bellman Alarm Clock will give the following indications:
o Flashing with the flashing lights (17) on the front, provided that the Flash Switch (9) is in the ON
position.
o Emitting the sound signal selected via the external trigger signal switch (8), provided that the Sound
Switch (7) is in the ON position.
o If the BE1270 Bellman Bed Shaker (accessory) is connected, it will vibrate in the way selected via the
external trigger signal switch (13).
To test the built-in telephone connection:
• Connect input (15) on the Bellman Alarm Clock to an analogue telephone socket using a BE9105
telephone flex (accessory) and an adapter plug (accessory).
• Ring the telephone number
• The Bellman Alarm Clock will give the following indications:
o Flashing with the flashing lights (17) on the front, provided that the Flash Switch (9) is in the ON
position.
o Emitting a ring-type sound signal, provided that the Sound Switch (7) is in the ON position.
o The BE1270 Bellman Bed Vibrator (accessory) will vibrate if connected
Trouble shooting
You can carry out a number of checks yourself before sending a product for repair.
Troubleshooting guide
Symptom
Nothing happens.
The LED (1) blinks.
The LEDs in the Snooze Button (4) do not come on
when the alarm clock is switched on.
The Alarm Clock does not emit any sound signals.
The Alarm Clock does not emit any flash signals.
Be1341
Solution
•
•
•
•
•
Bellman Visit System Information
Check that the power supply unit is connected
correctly.
Check that the power supply unit is connected
correctly.
Check that the power supply unit is connected
correctly.
Check that the Sound Switch (7) is in the ON
position.
Check that the Flash Switch (9) is in the ON
position.
Technical Solutions