Advertisement
Page 52
Function
General
The BE1520 Bellman Visit 868 Bridge is a product for indoor use and
operates as an interpreter, which conveys radio signals between the
Bellman Visit and Bellman Visit 868 systems. With a Bellman Visit 868
Bridge, you can therefore use products from the old and new system side
by side.
The Bellman Visit System will not of course have the same wide range
of new indication options as the new Bellman Visit 868 System, but the
system will emit signals.
The Bellman Visit 868 Bridge also operates as a multi-function
transmitter, either via a pushbutton or via an input for an Exterior
External Trigger. The Pushbutton and the Exterior External Trigger
can be detected separately and transmit different Signal Patterns to
the receivers in the Bellman Visit 868 System depending on what has
activated the Bellman Visit 868 Bridge. There is a range of options for
connecting the Bellman Visit 868 Bridge to various applications.
Radio Key
On delivery all Bellman Visit and Bellman Visit 868 products are tuned
to the same Radio Key. If you have a neighbour with a similar system,
you can change to different Radio Keys so that you do not affect each
other's systems. If you use the Radio Key Switch (5) to change the Radio
Key on this transmitter, you must also change all other units in your
Bellman Visit 868 System and your Bellman Visit System to the same
Radio Key. Refer to the user manual for the relevant unit.
Please note:
All Bellman Visit 868 products within the same system
must be tuned to the same Radio Key in order to operate
as a group.
Indicators and Signals
System indicators
The LED (1) blinks, when the Bellman Visit 868 Bridge transmits or
receives radio signals.
Power supply
When the Bellman Visit 868 Bridge is activated, the LED (1) normally
blinks green. This means that the back-up battery is in good condition.
If the LED (1) blinks yellow, this means that the back-up battery is flat
and must be changed. Only use a 6LR61 (alkaline) or 6F22 (lithium) type
battery.
When the Bellman Visit 868 Bridge is connected to the power supply
unit, the LED is constantly green, apart from when it is receiving or
transmitting radio signals when it blinks.
Be1520
Technical Solutions
Bellman Visit System Information
Activation
Via test button
Exterior External Trigger:
3.5 mm stereo (mono provides a
connection) jack plug (3)
Connection: between the inner and
outer pins of the mono type 3.5 mm
jack plug or between the middle/inner
and outer pins of the stereo type 3.5
mm jack plug, see diagram.
DC: 2 to 30 V between the inner pin
and middle pin on the stereo type 3.5
mm jack plug, see diagram.
AC: 3 to 24 V RMS 5 -150 Hz
between the inner pin and middle pin
on the stereo type 3.5 mm jack plug,
see diagram.
U
U
Additional information
For indoor use only
Dimensions B x H x D:
60 x 98 x 30 mm
Weight:
With back-up battery: 110 g
Without back-up battery: 70 g
Colour: White with grey
pushbutton.
Accessories
BE9024 Door Entering Contact Mat
BE9023 Magnetic Switch
Hide quick links:
Advertisement
