Manual Mode - HazeBase base-prime Operation Manual

4.2 Manual mode

Operation in manual mode is very easy. The fogging process is started with the START button (U) in the main
screen. Pressing the START button again stops the fogging process.
The pump value can be changed via + and -, as well as by pressing on the center. Then a keyboard will appear
and the value can be entered. A change in the pump value is possible both before and during the misting pro-
cess.
i
It is important to know that the pump characteristics can influence the ejected amount of
fog. This also means that at selected 100% possibly less fog can be generated. Further
information can be found in the chapter pump characteristics
www.hazebase.com
English
7