MACHINES AND
ACCESSORIES
7 CONTROLS
They are located at the base of the machine body. They are used to turn on and off the bench
grinder.
7.1 On switch (start)
The green button (I), is used for starting (turning on) the
bench grinding machine (Figure 11). With this button, the
electric motor is powered and the equipment is set in
rotation (grinding wheels, brush, etc.).
7.2 Stop button
The red button (0), is used for switching off (stop) the bench
grinding machine (Figure 12). With this button, the power to
the electric motor is turned off and the rotation of the
equipment is stopped (grinding wheels, brush, etc.).
Risk of abrasion
After pressing the off switch (0), the equipment will continue to rotate by inertia.
Do not allow body parts near the wheel or the brush while in motion!
Figure 11 – Start button.
Figure 12 – Stop button.
Page 19 of 33