1. Manuals
  2. Brands
  3. Fervi Manuals
  4. Grinder
  5. 570
  6. User and maintenance manual

Fervi 0570 User And Maintenance Manual

Fervi axial grinder set with sanding attachments
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
USER AND
MAINTENANCE MANUAL
Axial Grinder Set with Sanding
Attachments
Art. 0570
TRANSLATION OF THE ORIGINAL INSTRUCTIONS

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 0570 and is the answer not in the manual?

Questions and answers

Related Manuals for Fervi 0570

Summary of Contents for Fervi 0570

  • Page 1 USER AND MAINTENANCE MANUAL Axial Grinder Set with Sanding Attachments Art. 0570 TRANSLATION OF THE ORIGINAL INSTRUCTIONS...
  • Page 2 Manual on the date of issue, listed on this page; however, the machine may be subject to potentially major technical changes in the future, without the Manual being updated. Therefore, contact FERVI information about modifications that could implemented.

  • Page 3: Table Of Contents

    HARDWARE INDEX GENERAL SAFETY INSTRUCTIONS............. 4 Risks Associated with the Work Area ................4 Risks Associated with the Presence of Rotating and/or Moving Parts......4 Personal Protective Equipment ..................4 Technical Support ......................4 DESCRIPTION OF THE GRINDER AND INTENDED USE ....... 5 Technical Specifications ....................5 Identification Plate .......................6 IMPROPER USES AND PRECAUTIONS ............

  • Page 4: General Safety Instructions

    HARDWARE 1 GENERAL SAFETY INSTRUCTIONS  During use, maintain control of the tool.  The operators represent the most important aspect of safety. To better protect against the risk of injury, work cautiously and carefully.  When a fault / defect is detected, immediately disconnect the power supply cord from the tool.

  • Page 5: Description Of The Grinder And Intended Use

    HARDWARE 2 DESCRIPTION OF THE GRINDER AND INTENDED The Grinder (Art. 0570) is a portable pneumatic tool, to be used for grinding, finishing and bevelling small surfaces. By changing out the abrasive tools (grinding wheels), it is possible to grind or polish different materials, such as metals, wood and plastic.

  • Page 6: Identification Plate

    HARDWARE 2.2 Identification Plate There is an identification plate on each machine, which shows the following data:  The name and address of the manufacturer;  Model/serial number;  Year of construction;  Maximum working pressure;  Nominal rotation speed. Figure 2 –...

  • Page 7: Commissioning

    HARDWARE 4 COMMISSIONING 1. Remove the air inlet cap, then screw the supplied nozzle into hole (Ref. 8): 1/4" NPT Male Quick-Release Coupling 2. Put a few drops of lubricating oil (without resin acid) in the air inlet nozzle. 3. Check the flexible air supply hose. 4.

  • Page 8: How To Use

    HARDWARE 5 HOW TO USE 5.1 Attaching the Abrasive Tools Crushing and Cutting Before attaching and/or removing the grinding wheels, always remove the air supply hose. Protective gloves Before attaching and/or removing the grinding wheels, wear suitable protective gloves. 1. Choose the grinding wheel with the desired shape and size. 2.
  • Page 9 HARDWARE Crushing and Cutting  Always be sure to insert the shaft of the grinding wheel into the hole of the tool chuck by at least 10mm.  Always make sure that the tool is assembled correctly while trying to manually remove it from the grinder.

  • Page 10: Power On / Off

    After assembling the grinding wheel and connecting the flexible compressed air supply hose, grab the grinder by its "torch" handle. The Grinder, Art. 0570, is equipped with a screw for adjusting the grinding wheel's rotation speed according to the type of material: the harder the material, the greater the speed of rotation.
  • Page 11 HARDWARE Figure 7 – Turning on the grinder (A: disabling the safety – B: press the lever). The grinder's start lever is a continuous hold lever, in the sense that the function controlled (i.e., the rotation of the grinding wheel) is active as long as the lever itself is kept pressed. Therefore, release the lever to shut it down in an emergency.

  • Page 12: Maintenance And Cleaning

    HARDWARE 6 MAINTENANCE AND CLEANING The purpose of this chapter is to provide all the information on maintenance procedures and their frequency as required by the machine. Frequency ACTION Daily Weekly 1. General visual inspection 2. General cleaning 3. Clean the air outlet nozzle 4.

  • Page 13: Bill Of Materials And Spare Parts

    HARDWARE 7 BILL OF MATERIALS AND SPARE PARTS Description Description 0570/01 Screw 0570/17 Back closure 0570/02 O-ring 0570/18 Linchpin 0570/03 O-ring 0570/19 Rotor vane 0570/04 Air regulator 0570/20 Rotor 0570/05 Spring 0570/21 Cylinder 0570/06 Air valve bushing 0570/22 Conical muffler...

Table of Contents