5 INSTALLATION OF THE MACHINE
To install the bench grinder, proceed as follows:
Clean the Machine
Before beginning assembly clean the protective product from the parts of the machine.
5.1 Positioning and fastening on the bench
Loss of stability
Mount the Bench grinding machine on a surface that is solid and strong to avoid it falling over
and so it does not cause vibrations;
Clean the Workbench
Before fixing the machine in place, clean the workbench of any materials and dirt that may be
present.
Place the machine on a workbench (or other supporting surface) that is level, stable and
sturdy and secure it with four bolts in the appropriate fastening holes in the base of the
machine body (see Figure 4).
In the case of using a steel bench, it is advisable to place between the grinder and the
supporting surface a layer of material which is suitable to reduce the vibrations.
Installation of the machine
Do not install the machine outdoors to avoid deformation, loss of function and damage to the
electrical control circuit.
Page 14 of 33
Figure 4 – Close-up of fastening holes.
MACHINES AND
ACCESSORIES